OEM Distribution Panel Box Factories – ETB08 – Etechin
OEM Distribution Panel Box Factories – ETB08 – Etechin Detail:
Products Description
ETB08 Single Phase Plug-in type Pan assembly,this range of single phase pan assemblies is designed to suit applications where switching and protection of the neutral is deemed unnecessary. Each pan assembly is fully insulated incorporating plug in mounting plate, incoming and outgoing busbar assembly. They can be easily and quickly incorporated into custom built enclosure systems. PS pan assemblies are designed for use with SP and TP MCB, and are also suitable for two pole two phase equipment
They are highly welcome by the panel builder, and electrician in the electric power distribution.
Features
Standards: BS/ EN/ IEC 61439 -2
Rating: this model was classified into 2 frames by different thickness copper use. 125A – 2.5mm 125A – 2.0mm
Operating Voltage: 400/415V
Frequency: 50/60Hz
Incomers: Free be designed/ can be MCB, ISOLAOTR, WIRING
Outgoing: MCB in 25mm interval,any kinds of plug-in MCBs
4, 6, 8, 12, 18 (SP) options
Fully shrouded continuously rated copper busbar
25kA short circuit capacity
One piece (no welds or rivets) phase busbars to eliminate the risk of hot spots
Accepts 6kA, 10kA and 15kA MCBs and flying lead RCBOs
Characteristic
1. Fire-proof material for the isolation case
2. Incoming switch: Wiring, MCB,ELCB,ISOLATOR,MCCB
3. Outgoing: upto 18 poles in 25mm interval: any kind of plug-in MCBs
4. Installation base according the main and branch breaker required
5. Main copper bar and branch bar fabricated as one part
|
Standard |
IEC61439-2:2011 |
|
Rated current: |
125A |
|
Copper Thickness |
2.0/2.5mm |
|
Material |
Tinned plated copper purity 99.7% |
|
Incomer |
single/double phase MCB, Isolato to 125A |
|
Outing going |
up to 18 poles way any kind of MCB |
|
No. of Way |
4W, 6W, 8W, 10W, 12W, 14W, 16W, 18W, |
|
Branch breaker |
Plug in type MCB |
Product detail pictures:
Related Product Guide:
Our solutions are widely regarded and trustworthy by consumers and may meet continually modifying financial and social requirements for OEM Distribution Panel Box Factories – ETB08 – Etechin , The product will supply to all over the world, such as: Vietnam, Ottawa, Norway, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we will continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Leona from Barcelona - 2018.07.27 12:26
In China, we have many partners, this company is the most satisfying to us, reliable quality and good credit, it is worth appreciation.
By Dora from Italy - 2017.04.28 15:45