ODM Panel Board Supplier – ETB02 125A Din rail Pan assembly – Etechin

Features

Standards: IEC 61439 -2
Rating current: this model was divided into 3 frames by different thickness copper used.
250A 3.0 mm;
200A 2.0mm;
125A 1.5mm
Operating Voltage: 400/415V
Frequency: 50/ 60Hz
Incomers: Free be designed/can be MCB, ISOLAOTR, MCCB, WIRING
Outgoing: branch mounted on the rail of the base. The rail of the base can be designed according customer’s inquiring,
Suitable for mounting in separate enclosure
No. of ways: 4,6,8,10,12,14,16, 18,20,22,24W
No. of phase: this model Pan assembly busbar also can make in single phase, and two phase.
Fully shrouded continuously rated copper busbar

One piece (no welds or rivets) phase busbars to eliminate the risk of hot spots
Accepts 6kA, 10kA and 15kA MCBs and flying lead RCBOs

Characteristic

1. Fire-proof material for the isolation case
2 .Incoming switch: 3Phase Mcb,Isolator,Elcb,MCCB up to 250A
3 .Outgoing: upto 72poles way any kind of MCB
4 .Installation base as required: according different brands branch and main breaker, adjust the position of the rail and bracket . Base can be fabricated separately for branch, and mainbreaker
5 .Smaller design
6. Outgoing MCB in 18mm interval: any kind of MCBs
7. Main copper bar and branch bar fabricated as one part
8. According different main breaker make the suitable connection link.