China ODM Delay Type Rccb Factories – 2P, 4P, 1P+N, RCCB, RCD, Residual Current Circuit Breaker, up to 100A – Etechin Manufacturer and Exporter

ODM Delay Type Rccb Factories – 2P, 4P, 1P+N, RCCB, RCD, Residual Current Circuit Breaker, up to 100A – Etechin

Product Detail

Product Tags

Feedback (2)

With responsible good quality method, good status and excellent client services, the series of solutions produced by our company are exported to lots of countries and regions for Chamber Box, Earth Leakage Switch, Mccb Panel Board, We are sincerely on the lookout ahead to cooperate with buyers everywhere in the entire world. We imagine we will satisfy along with you. We also warmly welcome consumers to visit our manufacturing unit and purchase our items.

ODM Delay Type Rccb Factories – 2P, 4P, 1P+N, RCCB, RCD, Residual Current Circuit Breaker, up to 100A – Etechin Detail:

Products Description

ETM8L series RCCB conforms to the iec 6 1008-1 standard
ETM8L RCCB rated current is 25-100 ampere, 25A, 40A, 63A, 80A, 100A.
The short circuit breaking capacity is 10 KA and 6 KA
The rated residual operating current is 10 to 300 mA
Rated insulation voltage: 230 Volt or 240 Volt for 2poles and 400 Volt or 415 volt for 4poles
It has double poles (1P+N) , and four poles (3P+N)
There is a position indicator equipped on the products, Red is on, Green is off.
The RCCB Equipped with a test button to check the health of the device.
Equipped with neutral terminal
The RCCB terminals are are IP20 protection which is designed for finger and hand touch safe to keep the safety during installation.
The ETM8L can work reliably in harsh environment, in ambient temperature from -25°C to 55°C.
The electrical life can be up to 8000 operations and mechanical life up to 20000 operations, while the IEC requirement is only 4000 operations and 10000 operations.
It’s mounting type is to be mounted on din rail EN60715 35mm.

Technical Characteristic

Standard	IEC/EN 61008-1
Electrical	type(wave form of the earth leakage sensed)		AC,A,AC-G,A-G,AC-S,A-S,A-SI
features	Rated current in	A	25,40,63,80,100
	Poles		2P 4P
	Rated voltage Ue	V	230/400,240/415
	Rated sensitivity I△n	A	0.01 for 25A,0.03,0.1,0.3
	Insulation coltage Ui	V	500
	Rated residual making	A	500(In=250A/40A),1000(In=80A/100A)
	and breaking capacity I △m	A	630(In=63A)
	Short-Circuit current Inc=I △n	A	6000/10000
	break time under I △n	S	≤0.1（Normal type),10ms~300ms(G type).150ms~500ms(S type)
	Rated frequency	Hz	50/60Hz
	Rated impulse withstand voltage(1.2/50)Uipm	V	6000
	Dielectric test voltage at and ind.Freq.for 1min	KV	2.5
	Pollution degree		2
Mechanical features	Electrical life		2000
	Machanical life		2000
	Fault current indicator		Yes
	Protection degree		IP 20
	Ambient temperature(with daily average≤35°C)	°C	-25~+55
	Storage temperature	°C	-25…+70
Installation	Terminal connection type		Cable/U-type busbar/Pin-type busbar
	Terminal size top/bottom for cable	mm²	50
		AWG	18-3/18-2
	Terminal size top/bottom for busbar	mm²	44485
		AWG	18-8/18-5
	Tightening torque	N*m	2.5
		In-lbs.	22
	Mounting		OnDIN rail EN 60715(35mm)
			by means of fast clip device
	Connection		From top and bottom

Product detail pictures:

Related Product Guide:

We normally believe that one's character decides products' quality, the details decides products' high-quality ,while using the REALISTIC,EFFICIENT AND INNOVATIVE staff spirit for ODM Delay Type Rccb Factories – 2P, 4P, 1P+N, RCCB, RCD, Residual Current Circuit Breaker, up to 100A – Etechin , The product will supply to all over the world, such as: Puerto Rico, Malaysia, Mauritania, We are proud to supply our products and solutions to every costumer all around the world with our flexible, fast efficient services and strictest quality control standard which has always approved and praised by customers.

A Type Rccb