China wholesale Rcd Breaker Switch Factory – Mini Isolator Switch, ETG3-100 series Isolating switch, main switch, 1P, 2p, 3p, 4p – Etechin

Products Description

ETG3-100 series isolator is in complied with GB14048.3/ IEC60947-3 standards standard.
The rated current of this isolating switch is 63A, 80A, or 100A
The rated working voltage of this isolating switch is 240 or 415V and below.
The pole number of the breaker can be classified as : single pole (1p), double poles (2p), three poles (3p), and four poles(4p).
The isolator terminals are IP20 protection which is designed for finger and hand touch safe to keep the safety during installation.
The isolator can work reliably in harsh environment, in ambient temperature from -5°C to 50°C.
It’s mounting type is to be mounted on din rail EN60715 35mm.
Mechanical and electric life: the mechanical life is 20000 times, and electric life 10000 times.

Isolating switch is a switching device that is mainly used for “isolating power supply, switching off operation, connecting and cutting off small current circuits” and without arc extinguishing function. When the isolating switch is in the open position, there is an insulation distance and an obvious disconnection mark between the contacts that meet the specified requirements; in the closed position, it can carry the current under normal circuit conditions and under abnormal conditions (such as short circuit) within the specified time. current switching device. It is generally used as a high-voltage isolating switch, that is, an isolating switch with a rated voltage of more than 1kV. Its working principle and structure are relatively simple, but due to the large amount of use and high requirements for work reliability, the design, establishment and operation of substations and power plants are required. The impact on safe operation is greater. The main feature of the isolation switch is that it has no arc extinguishing ability, and can only divide and close the circuit without load current.