MCCB, ETS6 series Moulded Case Circuit Breaker, 6KA, 2P, 3P, 4P, 3 Phase, 63A-1250Amp, 1600Amp

MCCB, ETS6 series Moulded Case Circuit Breaker, 6KA, 2P, 3P, 4P, 3 Phase, 63A-1250Amp, 1600Amp

Manufacturer, OEM

  • Standards: IEC/EN60947-2
  • Breaking capacity: 10KA-65KA
  • Rated Current: 100-1600A
  • MCCB is the short form of Molded Case Circuit Breaker. It is the circuit breaker used when the loaded current is higher than the limit of a MCB. MCCB is an electrical protection device which has the same protection of MCB. It is used for protection against overload and short circuit faulse, and can be also used as an isolator or main switch. It is mainly used in industrial applications and higher current rating and fault level residential applications, because its wide rated current and high breaking capacity. MCCB can be used to offer protection for the capacitor bank, generator and main electric feeder distribution.

    Product Detail

    Product Tags

    Products Description

    ETS6 series of circuit breakers are new upgraded circuit breakers researched and developed by the company combined with the advantages of similar international products and demand of domestic and international markets.
    With insulation voltage up to 1000V, the circuit breaker is applicable for distribution systems of AC50Hz, rated working voltage 690V and rated working current from 10A to800A, used to distribute electric power energy, protect circuits and power equipment against overload, short circuit, under voltage and so on, also can be used for infrequent startup of motor and protect it from overload, short circuit or under voltage.
    It is featured with small size, high breaking, short flash over, etc., is the ideal product for users. It can be vertically installed or horizontally installed.
    ETS6 series DC Molded case circuit breaker (hereinafter referred to as circuit breaker) is suitable for DC systems of rated voltage up to and including DC 1000V and rated current 10~800A, used to distribute electric power energy, protect circuits and power equipment against overload, short circuit and so on.
    The products can be fed with wires from top and bottom, and it is polarity-free.
    It complies with the standards IEC60947-2, GB14048.2, etc.


    Feature 1: current limiting capacity
    Current-limiting refers to limit of the increase of short-circuit current in the loop, and in the loop protected by STM6, peak value of the short-circuit current and the 12t energy in the circuit will be much smaller than the prospective value.
    U-shaped static contact
    Unique U-shaped static contact can achieve pre-breaking technology:
    The so-called pre-breaking technology refers to when short-circuit current flows through the contact system, electric power generated by U-shaped static contact and moving contact is mutual exclusive. The greater the short-circuit current is, the greater the repulsion of the electromotive force, and it is generated together with the short-circuit current at the same time. Before the trip action occurs, the electro dynamic repulsion force can make the static and moving contact separation, by increasing the arc to increase the equivalent resistance between them to achieve the purpose of suppressing increase of short-circuit current.

    Feature 2: modularized accessories
    Accessory: For the circuit breakers of the same frame, they has uniform sizes regardless of the breaking capacity and rated current: Accessory: Users can freely
    Choose and expand functions of circuit breakers according to their needs.
    Modularized accessories have insulation function, which is easy for hot-line operation and installation.


    Feature 3:miniaturized frame
    5frame sizes:125 type,160 type,250 type,630 type,800 type Rated current of ETS6 series 10A~800A


    Feature 4: contact repulsion device (patented technology)
    The technical scheme adopted by the invention is:
    As shown in Figure 1, the new contact device is mainly consisted of static contact, moving contact, shaft 1, shaft 2, shaft 3 and springs; When the circuit breaker is in the closed state, shaft 2 acts on the right side of the spring angle: When the circuit breaker has a large fault current, the moving contact will be subjected to the electric repulsion generated by the current itself, and rotate with the center of shaft 1, when shaft 2 rotates to the top of the spring angle with the moving contact, it makes moving contact to rapidly rotate upwards and quickly break the circuit upon the reaction of spring, it has enhanced the breaking capacity of the product through optimization of the contact structure.


    Feature 5:
    Intelligence Network communication is more convenient. It accesses to Modbus communication system through dedicated connection. it can be with communication function can select monitoring accessories to realize door display, read, set and control.


    Feature 6: modularized arc extinguishing system


    Feature 7: unification, under the same frame size have the same dimensions, installation dimensions and appearance style. which is completely unified design.

    Working environment and installation conditions: Altitude up to 2000m;
    Ambient medium temperature should be within -5℃ to +40℃(+45℃ for marine products);
    It can withstand the effect of damp air:
    It can withstand the effect of molds;
    It can withstand the effect of nuclear radiation:
    The max inclination is22.5℃.
    It still can work reliably when the ship subjects to normal vibration;
    It can still work reliably if the product subjects to the earthquake (4gl.
    Places where the surrounding medium is free from explosion danger, and far away from gas or conductive dust that would erode the metal or destroy the insulation;
    Keep away from rain or snow.

    Circuit breaker components:


    1Auxiliary switch
    2Alarm switch
    3Shunt release
    4Undervoltage release
    5Terminal cap
    6Phase partition

    7 Front-board wiring
    8Electric operation
    9Manual operation
    10 Plug-in type back-board wiring
    11Back-board wiring

  • Previous:
  • Next:

  • Write your message here and send it to us

    Product categories

    Focus on providing mong pu solutions for 5 years.